Home > Pool Cue Accessories > Pool Cue Tip Tools > Tweeten Rapid Cue Top Sander

Tweeten Rapid Cue Top Sander

Tweeten Rapid Cue Top Sander
Item #: TTRCTSRegular Price: $21.95Sale Price: $14.95You Save: $7.00 (32%)
 
Usually ships the next business day Shipping Info


The Tweeten Rapid Cue Top Sander is a must have if you are putting on a new tip. This tool sands the top of the ferrule forming a flat base for the cue tip to be glued on. A rugged device that will last indefinitely. This product works fast to help you replace a tip in a hurry and is easy to use, no instructions required.

Overall Rating for Tweeten Rapid Cue Top Sander
(based on 65 reviews)
Nice tool
By Rob from Phoenix on February 24, 2014
Works as it should and takes the guesswork out of preparing the ferrule.

I would recommend this item to a friend.

Great prep tool
By Fred from Pittsburgh, Pennsylvania on February 23, 2014
This is a great tool to prep the ferrules for accepting new tips. Extremely easy to use and quickly prepares the surface. The nice thing is that it is tapered to sand the ferrule perpendicular to the center axis of the cue and it only takes a few turns.

I would recommend this item to a friend.

Nice tool
By Chad from , on February 12, 2014
This tool works great for getting a nice clean flat surface on your ferrule. Just make sure that is mounted exactly 90 degrees to ferrule before starting or it can put an angle on ferrule. I recommend using painter tape on shaft where you will be clamping on your shaft to avoid any dings. If used correctly it works great.

I would recommend this item to a friend.

Great
By Mike from Denison, TX on February 11, 2014
Tool was easy to assemble & use!

I would recommend this item to a friend.

good product
By jimmy hudson from texas on February 6, 2014
great product,just make sure to wrapblue painters tape on cue before use & dont tighten too much

I would recommend this item to a friend.

Great Tool
By Barry from , on December 8, 2013
Couldn't be easier

I would recommend this item to a friend.

As advertised good product
By Donald Nolen from Harrisburg, AR on September 27, 2013
this does a great job

I would recommend this item to a friend.

Does the job well
By JM from Helena, MT on September 18, 2013
The Rapid Cue Top Sander works well, giving you a good surface to install a tip on. Some advice... wrap some post it notes around your shaft before tightening this down, and do not over-tighten the clamp. Save yourself the dings.

I would recommend this item to a friend.

Fast Tip Change on the Spot
By Tim from Michigan, U.S.A. on July 16, 2013
Great addition to your on the road tip tool box.
This tool will give you the perfect surface to adhere your replacement tip to.
A new cue I had purchased had came with a hard tip. I prefer medium to soft tips. After removing the original tip with a Stanley knife I attached the tool to the shaft and after a few turns on the handle a few minutes later I was gluing on the new tip.
I was amazed at how square to the shaft I was able to obtain with this tool, I checked this out before attaching the new tip.
I would recommend this tool to anyone who would like to save money changing out their own tips, and those who travel with a cue tool box.

I would recommend this item to a friend.

Simple and effective
By Daniel from Owatonna, MN on April 29, 2013
This tool works well. There are definitely better tools, but for this price range, this is a great choice.

I would recommend this item to a friend.

Quick and Easy
By Kev from USVI on April 24, 2013
works like a charm takes the remnants of the tip right off... FAST! great product

I would recommend this item to a friend.

WOW
By J R Futch from Dolan Springs Az, on March 23, 2013
I have used thies for many years. If you wrap your stick with a piece of paper you wont get any marks from the mount. Also you can use any sandpaper on it just trim off the over hang.

I would recommend this item to a friend.

great tool
By E.J. from Boise, Idaho on March 20, 2013
Great tool. Another piece of sand paper and I give it five stars.

I would recommend this item to a friend.

Very Flat surface
By Daniel from Denver, Colorado on March 18, 2013
It is easy to use and makes a very flat surface that the tip sticks to easily. I used a finer grit for a cheap stick with a plastic ferrule. Replacement sandpaper is easy to find. If the disk is to big just trim it.

I would recommend this item to a friend.

Top Sander
By David from houston on February 26, 2013
Worked Perfectly.

I would recommend this item to a friend.

Great tool
By Jerry from Gorham Maine on February 1, 2013
This cue top sander does a great job but it is made of medal were the cue shaft goes they the tool but the sander does a great job on the feral

I would recommend this item to a friend.

Great Tool
By Alex Mann from Whitewater, WI on December 9, 2012
This tool gets the tip perfectly flat, and quickly. Only downfall is if you crank it down too tight on the cue, there will be marks dug into the wood. I use a piece of cloth between the cue and clamp.

I would recommend this item to a friend.

Great Tool
By Ed from Gainesville Fla. on November 15, 2012
This tool is a must for tip replacement but for one liitle thin I would have givrn it a5. The cue shaft clamp is metal and cam ding or mark the shafp. I solved this by use a piece of scrap rubber with it....I.E. an old bike inter tube works great......

I would recommend this item to a friend.

Flat Top For Sure
By Mark from , on September 9, 2012
Easy to use. A must have for tip replacement preparation. Use a bit of caution when attaching to cue. I can see where if misused (overtightened) that it could mark your shaft.

I would recommend this item to a friend.

Works but clamp is metal
By billy from , on September 2, 2012
Works but the clamp for the shaft is metal, should have been rubber. It could scrape the shaft if clamped too hard or slides while in use.

Works great, will save me lots of $$
By Tom from Houston, TX on August 1, 2012
I ordered tips, glue and a tip clamp. I had to go to another supplier(PoolDawg) to get sandpaper for the top sander and as well as tip snders as I could not find these items at your sight?

I would recommend this item to a friend.

Great Value For the Money
By Charles from Chicago on June 16, 2012
Works well & easy to use.

I would recommend this item to a friend.

great little tool
By matt from pa on May 23, 2012
This tool works good but make sure to put something aroud the shaft to keep the clamp fro damaging it

I would recommend this item to a friend.

cue top sander works good
By Quinn from San Manuel, AZ on May 14, 2012
this thing works great and made to last for a life time does everything it says. great tool to have in your tool box. and for the price its well worth it. cant go wrong..

I would recommend this item to a friend.

Awesome Tool
By Michael from Connecticut on May 6, 2012
This tool is perfect for the fix it yourself person. I had a few cues that all needed new tips so I figured I would try to do them myself. This tool was perfect to ensure the ferrule top was sanded flat and level.

I would recommend this item to a friend.

Works Great!
By John from SoCal on April 23, 2012
I bought one of these because a couple of cues were getting close to needing new tips and didn't want to take my cues in. After trying it on a test cue without any issues, I started to replace tips on my better cues.

It is so easy to use. I used felt and foam in between the shaft and the clamp to protect the shaft. I start with 100 grit sandpaper after I cut off the old tip to get it close, and then 220 to finish it up. One nice thing is that you can tighten it just enough to keep it in place, but you can still rotate it around the shaft to make sure that the sanding is even across the ferrule. Replaced 3 tips and they came out perfect.

John

I would recommend this item to a friend.

great product
By thomas from fenton, MO on March 29, 2012
Works very well with 150 grit sand paper cut it your self with a razor knife. And wrap shaft with tape but you dont need to tighten down the set screw so tight that you dent your shaft.

I would recommend this item to a friend.

time saver
By Brian from corona, ca on February 26, 2012
works perfect. sands perfect flat ferrule in seconds

I would recommend this item to a friend.

Wonderful tool
By Jeremy from Dawsonville, ga on February 23, 2012
Excellent tool! Easy to use and perfectly advertised! No instructions needed! Only con is they needed to use a piece of paper, felt, or something soft so as not to ding and dent the shaft! Overall a wonderful five-star product!

I would recommend this item to a friend.

tweeten cue top sander
By daniel from everson,wa on February 16, 2012
This is a useful tool. previously I always was unsure about how flat and square I got the cue tip. No worry now and it is easy to achieve perfect results. I do think a pad should placed between the cue and the jaws of the sander to prevent damage to the shaft.

I would recommend this item to a friend.

Tweeten Rapid Cue Top Sander
By Ronald from SC on January 26, 2012
Worked Great

I would recommend this item to a friend.

a must have
By Seth from Hyannis, MA on January 25, 2012
this thing is wirth its weight in gold! so simple, but it works great. the rough sandpaper might be too much for some, but i think it's ideal for leaving a good glueing surface. like others have said, definitely wrap the shaft with something first though. it'll definitely leave dents if you don't.

I would recommend this item to a friend.

does the trick
By Ronald from Charles Town, WV on January 12, 2012
good item, makes changing a tip breeze

I would recommend this item to a friend.

Review what headline? I never understood this question.
By Norman from Glen Burnie, MD on December 27, 2011
I like it. It does the job. Just be careful when clamping down the brace - take your time. You do not want to dent the shaft. I would like to see it come with finer grit sandpaper. I'll buy some big sheets and cut out my own.


I would recommend this item to a friend.

great tool!
By Miguel Rivera from oak creek,Wisconsin on December 13, 2011
It does what its says its does and its very easy to use,you have to be careful not to tighten to much onto your cue,but that's only common sense,love the service from ozone, the shipping was great and everything that was in my order got here in time.

I would recommend this item to a friend.

Great Tool
By Snydes from Brookings, Oregon on December 1, 2011
I've read quite a few reviews on this, some of the reviews were bad but in my opinion the bad reviews were made by someone who didn't know how to use it. the tool works great and i would recommend it.... GREAT TOOL and PRICE TOO.........

I would recommend this item to a friend.

Sander
By Jeff from Alabama on October 31, 2011
Works great!!! Better than expected

I would recommend this item to a friend.

Good One
By Vincent from San Jose on October 17, 2011
easy to use

I would recommend this item to a friend.

Cue Top Sander
By Kevin from Jeffersonville, IN on October 12, 2011
Works well to sand the pool cue prior to installing or gluing the new tip on the pool cue. If you change pool cue tips, this is a good tool to have with your billiard equipment.

I would recommend this item to a friend.

Fast and easy
By Craig from Buckeye, AZ on October 9, 2011
I read the reviews prior to using it and protected the cue where the clamp goes. It only took a couple minutes for the whole process. I am going to make a finer grade sanding disc to use after the one that came with it so the end is a little smoother.

I would recommend this item to a friend.

Works well
By leland from , on September 29, 2011
Sander works as advertised and does the job well. Wish it had instructions though. Was kind of puzzled as how to attach the sanding circle to the plate, as it wasn't a peel-and-stick kind. Finally used an Elmers glue stick, and it works fine. I wrapped the shaft a couple times around with a paper towel before securing it in the clamp, to prevent nicks or dents in the shaft.

I would recommend this item to a friend.

Tweeten rapid cue top sander
By jim from , Mtn. Home AR on September 22, 2011
well made product at bargain price, ozone never lets me down,thanks again folks.

I would recommend this item to a friend.

Cue Top Sander
By Joe from Ventura Calif. on August 24, 2011
If you are serious about getting a straight flat end on your stick, this is the way to go...
It is an excellent heavy duty tool and well worth the investment...
Recomendation : Wrap a piece of painters tape where the clamp is positioned to keep
from denting or scratching the cue.. A small amount of rubbing alcahol will remove any tape residue..

I would recommend this item to a friend.

Works Great BUT
By kevin from ma on July 23, 2011
No directions, and it dented my cue. I would suggest to put a small cloth or napkin where the clamp goes.

I would recommend this item to a friend.

Foolproof Tweeten Rapid Cut Cue Top Sander
By Eugene from Clovis, CA on January 30, 2011
I wrap the cue shaft with 3 rounds of paper to protect it from scratches and dents. After cutting the old tip off with a razor knife, I fasten the Tweeten Cue Top Sander making certain the clamp isn't turned upside down so I'll get a perfect right angle finish. I turn the handle applying only light pressure until the old tip is completely removed, but not cutting into the ferrule. I'm now ready to replace the tip using the Tweeten Cue Repair Kit. This tool is very simple and works great!

I would recommend this item to a friend.

Clean Your Farow surface!!!!!!!
By Gary A. Howay from Lansing, Michigan on January 13, 2011
This item is a well made item!

I would recommend this item to a friend.

works great perfect tool for tip replacement
By John from Layton, UT on December 28, 2010
love it because you need a flat surface to start with and that is what it does

I would recommend this item to a friend.

excellent tool for sanding ferrel
By Pete from College Grove Tn on December 20, 2010
If you are going to put a tip on, this tool is perfect for crating a flat mating surface for the new tip.

I would recommend this item to a friend.

is very helpful
By carlos castaneda from dominican republic on December 16, 2010
i just what i need it to prepare de ferrule for new tips

I would recommend this item to a friend.

Functional Tool
By DR Mann from Mukwonago, WI on December 15, 2010
As we all know, replacing a tip as two essential preparation steps. 1) Flat and clean ferrule surface that is parallel to the shaft. 2) A tip that has had the finish sanded from the bottom. Failure to complete either step will probably cause the tip to pop off in a brief period of time. This is a functional tool for completing step 1. Spend another dime an buy some press-on felt and cover the clamping surfaces. Do not forget to sand the bottom of the tip, glue will not completely adhere to tip finish

I would recommend this item to a friend.

NO WORDS
By RICARDO from COLOMBIA on November 23, 2010
REGULAR ITEM

Excellent device
By Claudio Gálvez from Miami, Florida on October 21, 2010
Very helpful and easy to use

I would recommend this item to a friend.

You need this
By doodle-bug from Tennessee on October 6, 2010
if you are gonna fix your cues you need one of these... great material .great price

I would recommend this item to a friend.

DID THE JOB
By MOON from Fla on July 5, 2010
NO DIRECTIONS FOR USE NEED TO PAD CLAMP PREFORMED FINE MAY BE OVERPRICED

I would recommend this item to a friend.

By Brad from Lake Geneva, WI on May 14, 2010
This is a really nice tool. It makes replacing a tip easy to do. I'm glad I read some reviews on protecting your cue from getting scratched with this tool. I wish that the manufacturer would incorporate some kind of padding to eliminate damage to your cue.

Good Time Saver and Work Perfecter
By H&T from Kingdom of Bahrain on April 29, 2010
Very useful tool that can save you lots of time you would normally spend to have a smooth flat ferrule, however, one down side about it which I am completely shocked the manufacturer didn't think about is that the cue is tightened between 2 metal pieces that are completely rigid and can easily damage the shaft if over tightened.

By John on April 28, 2010
works great.

Cue top sandder
By Brian Smith from McMInnville, Oregon on April 21, 2010
Bought this for a friend and he loves it. I had him change a tip on one of my cues, great job.

cue top sander
By ken from KANSAS CITY MO on March 30, 2010
do not wast your time replacing a tip w/o using this sander first,unless you just like wasting your timethat is.

Fast and easy
By Christina on January 21, 2010
I tried so many times to simply sand the top of my cue with sand paper and every time my tip would pop off the first time I tried to use it after putting on a new tip. This happened to me about 6 times before I finally invested in this. I bought this thing and within minutes I had a nice flat surface and a secure surface. I pressed the tip to the side slightly and it hasn't popped off. I'm am happy with this purchase. The sand paper is too coarse, but I just figure it means more grip for the glue.

Sander
By Larry from Newark, DE on January 17, 2010
Great for snading the top of the cue before replacing the tip.

By adam from oregon on December 14, 2009
This is good tool but only comes with one sanding disc that is very abrasive i think 60 so you might need less if you want to be delicate and can damage the shaft so you need to wrap the shaft in something before using the sander

Tweeten Rapid Cue tip Sander
By P from Fl on October 16, 2009

A Little Off The Top
By Dan from Birmingham, AL on October 5, 2009
This tool is a must if you choose to replace your own tip. It will insure you get a nice, flat ferrule to install your new tip on. It's quick and reasonably easy to use too. I suggest wrapping a strip of paper, or low adhesive, blue, painters masking tape around the shaft before tightening the bracket to minimize dings. I also suggest grasping and turning the disk with all five fingers as opposed to using the crank handle.
Pros:
Fast, easy to use, does a good job of removing last bit of old tip and flattening ferrule.
Cons:
Crank handle wobbles.

Tweeten super tool
By Mike webb on July 12, 2009
When I started replacing my own tips,I purchased the tweeten sander.It is NICE! It makes a perfectly level suface on ferrule for super flat area to securely apply tip. The tip will not come off. Excellent tool!





Need Help? 24 Hour Response M-F

Weekly Newsletter

Customer Service

Do you have questions about your order, shipping status or returns or do you need information on our products or about placing an order with us email us at sales@ozonebilliards.com 

Sign Up for our free email newsletter which includes articles and other great information about new products and special offers.

Click Here To Sign Up!

En Espanol

Si tiene preguntas en espanol mande correo electronico a espanol@ozonebilliards.com

 

Home | Help | Shopping Cart | Billiard Supplies | Shipping Info | Privacy Policy  | Site Index

Check Out Some of Our Most Popular Items

  Pool Tables | Pool Balls | Pool Table Lights | Cue Racks | Pool Table Felt | Pool Cue Cases | Lucasi Cues | McDermott Cues | Cuetec Cues | Predator Cues  | Scorpion Cues  | Joss Cues

Copyright 2001-Present Ozone Billiards, Inc.

Home > Pool Cue Accessories > Pool Cue Tip Tools > Tweeten Rapid Cue Top Sander

Tweeten Rapid Cue Top Sander

 

What Our Customers Say



.